Products Description

Description：

lModel no.: ZM-CJL-7

lThis machine is especially designed for flat coil winding.

lOperation: add alcohol into the cup, àpress reset to find the original position, as soon as the HMI display “stand-by”à clamp wireà after heating the protective mold, press start to run the machine.à During working, the protective door is closed, flyer rotates, the wire goes through tensioner, tension pulley, hollow spindle, and then guide out through the wire wheel, go through flyer guiding wheel, the wire is winded into the winding moldà After finish the coil, the protective mold heating to form the coilà protective door open, pushing mold and claw working simultaneously, push the coil outàprotective door close, continue working, till finish 1set complete coil, cut the wire, wind next set coil.

lThe coil turn no., quantity and winding tension is settable.

lThe bridge wire of the coil is adjustable.

Specification：

lInput voltage: 220V±10%

lRated frequency: 50Hz

lSpindle speed: 0~2000rpm

lMotor power: 1000W

lWire dia.: 0.1~0.8mm

Air source pressure: 0.5~0.7Mpa